• signs in china Home
  • |
  • Entra o registrate
  • |
  • Mi cuenta
  • |
  • Live Chat
Tel:+502 33657004/22338371/58321280
S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP
  • S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP

Ver imagen más grande y otras vistas (con zoom)

S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP

1400W cooling capacity, 30W DC pump, 1 outlet and 1 inlet. The water temperature is able to be adjusted.

   |   802 Transacciones

Codigo del articulo:CW-5200BG

  • Precio : $ 466 - 518/set   (Aviso de Descuento) (Tiempo entrega 69-89 días)

    Precio de Mayoreo :
    • Cantidad (sets) Descuento Amount/set
      1. 1 0% $518
      2. 2 - 20 5% $492
      3. 21 - 50 8% $477
      4. 51 - 100 10% $466
    • ¿Necesitas más cantidades, por favor haga clic en Pedido al mayoreo
  • Cantidad: set(s) Costo Total : $518
  • Peso de Envio: 86.4lb (39.28kg) freightFlete

  • inquire

Buyer Protection


S&A CW-5200BG industrial water chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP

Description
Our CW-5200 is refrigeration type industrial Water Chiller of 1400W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There are 2 specifications as 1 water outlet / inlet and dual water outlet / inlet, applicable to cool single laser glass tube. 
Have design patent Certificate, CE and RoHS Certificate.
This Water Chiller has been sold largely to Europe, South America, Asia and other markets.
Economic cooling equipment, easy to install and operate, compact and easily movable.

Our industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.

Features
• 1400W cooling capacity; optional environmental refrigerant;
• Compact size, long working life and simple operation;
• ±0.3°C precisely temperature control; 
• The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
• Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
• Multiple power specifications; CE approval; RoHS approval;
• Optional heater and water filter.

Details:








Temperature controller panel:

Under normal circumstance, the new intelligent temperature controller does not need to adjust the controlling parameters.
It will self-adjust controlling parameters according to room temperature, guaranteeing to meet cooling requirements for machines.
Alarm Function’s Description:

Flow alarm and output ports:

In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-5200series chillers possesses an unique low flow alarm protection.

The cooling water circulation loop alarm causes and the work of the state table

Normal Flow
Indicator
Flow Alarm
Indicator
Buzzer
Output Ports
Hi, H2
Output Ports
H1, H3
Circulating pump works properly ON OFF NOT RING DISCONNECTION BREAKOVER
Blocked cooling water circulation loop OFF ON RING BREAKOVER DISCONNECTION
Alarm of water shortage OFF ON RING BREAKOVER DISCONNECTION
Faulted circulating pump OFF ON RING BREAKOVER DISCONNECTION
Power interruption / / / BREAKOVER DISCONNECTION

Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V.

Fill the water tank with purified water. Connect the water inlet of the water tank to the water outlet of the laser machine and connect the water outlet of the water tank to the water inlet of the laser machine. Connect the signal line of the water tank with that of the laser machine. Please see pictures below.

Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps.
A.Open the package to check if the machine is intact and all the necessary Accessories are completed.
B.Open the injection port to feed cooling water.

Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of anti - corrosion agentia. Working in cold north area, it’s better to use noncorrosive antifreeze fluid.

C.According to system conditions, please connect the water inlet and outlet pipe well.
D.Plug in power, turn on the power switch. (Do not start up without water in the water tank!)

(1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal.

(2) After the first boot, you must immediately check whether the water pipe leaks.

(3) Power switched on, if the water temperature is below the set figure, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters.

(4) As it takes a longer time to start the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently.

E.Check the water level in the water tank.

The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage.

F.Adjust parameters of temperature controller.

 CW-5000 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to “Operating status and parameters adjustment.”


One of the differences between the CW5200 water tank and the cw3000 tank lies in that the CW5200 water tank can keep the water at a uniform temperature. Its cooling function can keep the temperature at a certain value, which can be adjusted manually. All the parameters related to the water tank have been set as the correct value by our company before delivery. The user may refer to the parameter instruction manual of the water tank for detailed description on the parameters. It is strongly suggested that the user should not change the parameters without authorization. Our company accepts no responsibility for any insolvable problems caused by the user’s unauthorized changing of parameters
Maintenance
Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation.
You can use non – corrosive antifreeze if you are in the northern cold regions.  

Cautions 

1. Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Although the average operating current of the chiller is small, but the instantaneous operating current could be up to 6 ~ 10amps sometimes (The instantaneous operating current of models of AC110V power supply are possible to be up to 10 ~ 15amps).

2. Please make sure there is a stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 200 ~ 250V (110V model is of 100 ~130V). If you do need a wider operating voltage range, customization is available for us.

3. To protect the pump, it’s strictly forbidden to run the chiller without having water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited!

4. Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet.

5. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller.

6. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm.

Application:

CW5200 water chiller for cooling Co2 laser cutting machine

CW5200 water chiller for cooling SYNRAD RF metal lasers

CW5200 water chiller for cooling argon arc welding clamp

CW5200 water chiller for cooling blender

CW5200 water chiller for cooling lab vacuum pump

 
















Quality Report:

 

1. I don’t know this website well, how can I trust you?
2. Not clear about the Price Policy of Sign-in-China.com?
3. How to pay? Can I use credit card?
4. Is it safe to pay online? Will it occur any security problems concerning my personal information?
Mensaje rápido para este producto
S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP

S&A CW-5200BG Industrial Water Chiller (AC 1P 220V 60Hz) for a Single 130W or 150W CO2 Glass Laser Tube Cooling, 0.68HP

$466 - 518/set

Min. Order : 1 set

  • *Correo de empresa:
  • *Nombre:
  • Telefono:
  • +86(10) 6370-5868
  • *Mensaje:
  • caracteres:20(Min.) - 2000(Max.)
  • *Codigo de Verificacion:

Envio :
Enviamos a más de 200 países y 300 puertos de todo el mundo!
Por expreso: 3-5 días hábiles
Por mar: 20-60 días hábiles
¿Cuánto para que enviar a
mi casa?
Pago:
T/TTransferencia Bancaria :
:
:

Guía de vídeo :

Suscribase para obtener ofertas especiales

Recibe gratis actualizaciones, descuentos y ofertas especiales para ganar productos gratis y premios en efectivo

Encontrar mas>>

Mira nuestras promociones de esta semana.

www.sign-in-guatemala.com. es el mayor proveedor en línea de productos de publicidad en el mundo y especializados en el suministro de una solución integral para los clientes al seleccionar equipos de Publicidad, materiales de consumo articulos publicitarios, productos de publicidad, etc. También el centro de servicio en el extranjero autorizado por la Asociación China de impresión, de inyección de tinta, para lo cual hemos establecido sucursales en el extranjero, en 6 países extranjeros con el fin de brindar un mejor servicio a nuestros clientes en todo el mundo. Nuestros productos cubren todo el campo de la Publicidad y la señalización y todos los productos que suministramos se hacen de conformidad con las normas internacionales de calidad, como resultado de que, en la actualidad, tenemos más de 9000 productos en línea para la venta. Desde que implementamos la compra centralizada, todos los productos se cotizan a precios competitivos.